

PJ65
In the 1940s PeFeGe Eriksson in Stockholm began to manufacture what soon established a reputation for itself as a classic among industrial work lamps – an instantly recognisable icon that over the years has found a place in countless factories. Indeed, we’re proud to have a PeFeGe original on one of our own lathes here at Örsjö Belysning. Read more
Two Swedish architects, Ann Morsing and Beban Nord at Box Arkitekter, have risen to the challenge of updating this classic design to create a lamp to meet the new demands of today’s and tomorrow’s world – without compromising the distinctive appearance of the original that went out of production in the 1990s. “We could see the potential to transform the lamp into a product that would work in interior decoration contexts, simply by giving its lines a slightly more sophisticated look,” explains Beban Nord of Box Arkitekter. Today the new updated PJ series – contemporary, timeless and equally at home in both domestic, office and public settings – is produced by Örsjö Belysning in Nybro, Sweden. Ideally suited to a wide variety of styles and surroundings, the lamp combines flair with function. The name PJ has been retained. “It’s the original name, and it seemed only natural to continue to use it,” Beban Nord says.
A classic desk lamp. Available with a table base, PJ60, or clamp fitting, PJ65. A special solution to fit a hole drilled through the tabletop may also be ordered by request. The PJ series is manufactured in a lacquered metal finish.
A point to remember! When tightening the joints of the lamp, remove the outer wing nut and tighten the nut in the joint. Then replace the wing nut. The wing nut should only be used to make fine adjustments to the tension in the joints.
Show less text-
Oxide red RAL8015
-
Misty blue NCS 5020-B10G
-
Matt black RAL7016
-
Warm grey RAL7032
-
White RAL9016
Specification
Technical specification
Design | Box Arkitekter |
Electrical data | Class II IP20 230V |
Description | Enamelled metal in five colours. Clamp max 55 mm. Nut behind wingnut tightens joints. Not dimmable |
Socket | E27 |
Lightsource | 1 × 7,5W LED E27 2700K 806lm CRI <80 |
Connection | 2,5 m cable, plug included |
Care | Download Care Instructions |
Recycling | Download Recycling Manual |
Article no. & model
11298-01 | White RAL 9010 Body | |
11298-15 | Matt black RAL 7016 Body | |
11298-02 | Warm grey NCS 4005-Y20R Body | |
11298-06 | Oxide red RAL8015 Body | |
11298-10 | Misty blue NCS 5020-B10G Body | |
50312 | 7,5W LED E27 2700K 806lm CRI <80 (Need 1) | |
11018-1 | Attachment for table white RAL 9010 | |
11018-5 | Attachment for table matt black RAL 7016 | |
11018-2 | Attachment for table warm grey RAL 7032 | |
11018-6 | Attachment for table oxide red RAL 8015 | |
11018-0 | Attachment for table misty blue NCS 5020-B10G |